![Jupiter Avionics JA95-091 Скачать руководство пользователя страница 24](http://html.mh-extra.com/html/jupiter-avionics/ja95-091/ja95-091_installation-and-operating-manual_2033794024.webp)
JA95-091 Audio Controller - Dual ICS Input
Installation and Operating Manual
Rev A
Page 20
(6)
Multi-function (Transmit/ICS) Switch
This is a green two-position centre-off momentary toggle switch.
When in the default XMIT/ICS configuration, this switch acts as
the pilot’s ‘Press-to-talk’ (PTT) button. The unit will transmit on
the selected transceiver when the switch is held in the ‘up’
position, and when held in the ‘down’ position, it will transmit on
the intercom.
See
below for Multi-function Switch operation.
Note
: At installation, this switch may be configured to operate in default or alternative mode. Check with your
installing agency for confirmation of the operation of this switch. The legends are interchangeable to allow
customization.
(7)
Music/Configuration Connector (
♫
/io)
This is a music input that is compatible with most music players.
It accepts a 3 pole 3.5mm stereo plug with a slim diameter
connector housing.
(This connector is also used during installation to change
configuration settings.)
CAUTION
:
Attempting to connect an incompatible plug or device could damage the unit, the attached
device, or both. If in doubt, check with your installing agency.
(8)
Transmit Annunciator - TX
This is a deadfront annunciator that will illuminate
when the JA95-091 is transmitting.
The default legend is ‘TX’, but it is interchangeable to allow customization.
(9)
Transmit Selector
This is a rotary six-position control that is used to
select transmission via one of the five transceivers or
the public address system (PA).
Each of the transmit selector positions is linked by a
white line to the corresponding transmit select
annunciator, transceiver switch and legend.
The appropriate annunciator will light green to show
which transceiver is selected for transmit - ‘PA’ in this
example.