Jupiter Avionics JA33-001, Инструкция по установке и эксплуатации

Страница: 15 / 27

JA33-001 Bluetooth
®
Transceiver
Installation and Operating Manual
Rev C Page 12
Note : If the Bluetooth ® mode of the JA33-001 is changed at a later date, it may be necessary to un-pair the
cellphone and repeat the pairing process to reset to the updated mode of operation.
3.3.1 iPhone Connectivity Configuration
The default setting for Call Audio Routing allows the iPhone to select where to route calls; either to the built-in speaker
or a Bluetooth ® headset. This can cause response delays and possible 'dropped calls'.
To ensure that the paired iPhone works more consistently, it should be configured to use the Bluetooth ® device as a
default when answering incoming calls.
Example from the iPhone 5:
• Select
Settings
•
Select Accessibility
• Select
Call Audio Routing
•
Choose Headset
Example from the iPhone 6:
• Select Settings
• Select
General
• Select
Accessibility
•
Select Call Audio Routing
• Choose
Headset
Changing the setting to Headset ensures that the iPhone selects the Bluetooth ®
device
as its first option, but will
revert to the iPhone's built-in speaker if no device is found.
3.4 Bluetooth
®
Status Indicator
If an optional Bluetooth ® Status Indicator is installed, the table below describes how an indicator lamp will behave at
various stages of the connection process.
Light
Bluetooth ® Connection Status
Flashing Waiting for connection
Steady Connected
Off Bluetooth ® off