Rev C
Page 11
JA33-001 Bluetooth
®
Transceiver
SECTION 3 – OPERATION
3.1
Introduction
This section contains the operating instructions for the JA33-001.
The JA33-001 Bluetooth® Transceiver allows the aircraft audio management system access to a non-aviation radio
and Bluetooth
®
enabled devices.
3.2
Bluetooth
®
Operation
The JA33-001 is a remote mount unit and has no user accessible controls. However, a Bluetooth
®
disable input is
provided to allow remote switching to control Bluetooth
®
connectivity. When a Bluetooth
®
enabled device such as a
cell phone is introduced into the aircraft, it can be paired with the JA33-001.
The JA33-001 Bluetooth® Transceiver can be configured at installation or in the field by a dealer or installer, using the
Jupiter Avionics Corporation ProCS™ configuration software. At that time, the Bluetooth
®
volume and profile
(selected for either music input or cellphone use) and the device name can be chosen.
The default Bluetooth
®
device name is
JA33-001-####
where
####
represents the serial number of the device.
3.3
Bluetooth
®
Pairing
Pairing is initiated using your cellphone or other
Bluetooth
®
enabled device. Refer to your cellphone
operating manual for full pairing information.
Typically, from the phone 'Settings' screen, select
'Bluetooth' and ensure that it is turned on. Then
confirm that the list of discoverable devices includes
JA33-001-###
or the selected device name. Select
this device.
The cellphone will pair with the JA33-001 in the
mode selected via ProCS™ - HFP (Hands-Free
Profile), A2DP Sink, or A2DP Source. If necessary,
confirm the mode with the installer.
