JUNO JDK5575E, Инструкция пользователя

Страница: 12 / 14

21 GB
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
MAINTENANCE
Constant maintenance guarantees proper operation and long-term reliability. Particular
attention should be paid to the metal grease filters and, for recirculation hoods only, to
the activated charcoal filters. The appliance is equipped with a system that indicates
automatically when it is time to carry out maintenance operations.
Metal grease filters
• Cleaning
These filters must be washed when LED
Filters starts, or at the most once every 2
months, using a normal household detergent;
their compact size also enables them to be
washed in a dishwasher.
• Removing the filters
Remove one filter at a time, pulling and
turning the handle in an anticlockwise
direction – see
fig. 11 . Replace by repeating
the same operations in reverse order, making
sure that the handle is turned to face the
outside.
• Enabling the alarm signal
The hood is already set up to trigger an alarm
indicating saturation of the metal grease
filters, so this function does not need to be
enabled.
• Resetting the alarm signal
To turn the alarm signal off, proceed as
follows:
- Turn off the lights and the suction motor;
- Press the
T4 button for at least 3 seconds,
until the LEDs flash in confirmation. In any
case the saturated filters alarm will only come
into operation when the suction motor is
turned on.
WARNING: always comply with the
maintenance and replacement times
indicated, in order to avoid a possible risk
of fire when the filters are saturated with
grease.
Fig. 11