JUNO JCN12224F5, Руководство пользователя

Страница: 31 / 72

Problem Possible cause Solution
The door is not closed cor-
rectly. Refer to "Closing the door".
Water flows inside the refrig-
erator. The water outlet is clog-
ged. Clean the water outlet.
Food products prevent that
water flows into the water
collector. Make sure that food products
do not touch the rear plate.
Water flows on the floor. The melting water outlet is
not connected to the evap-
orative tray above the com-
pressor. Attach the melting water outlet
to the evaporative tray.
DEMO appears on the dis-
play. The appliance is in demon-
stration mode. Keep the Functions pressed for
approximately 10 seconds until
a long sound is heard and dis-
play shuts off for a short time.
The temperature in the appli-
ance is too low/too high. The temperature regulator
is not set correctly. Set a higher/lower temperature.
The door is not closed cor-
rectly. Refer to "Closing the door".
The food products' tem-
perature is too high. Let the food products tempera-
ture decrease to room temper-
ature before storage.
Many food products are
stored at the same time. Store less food products at the
same time.
The door has been opened
often. Open the door only if necessa-
ry.
There is no cold air circula-
tion in the appliance. Make sure that there is cold air
circulation in the appliance.
If the advice does not lead to
the desired result, contact the
nearest Authorised Service
Centre.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
"Installation".
3. If necessary, replace the defective door
gaskets. Contact the Authorised
Service Centre.
Replacing the lamp
The appliance is equipped with a longlife
LED interior light.
Only service is allowed to replace the
lighting device. Contact your Authorised
Service Centre.
31