JUNO JCN12224F5, Руководство пользователя

Страница: 30 / 72

What to do if...
Problem Possible cause Solution
The appliance does not oper-
ate. The appliance is switched
off. Switch on the appliance.
The mains plug is not con-
nected to the mains socket
correctly. Connect the mains plug to the
mains socket correctly.
There is no voltage in the
mains socket. Connect a different electrical
appliance to the mains socket.
Contact a qualified electrician.
The appliance is noisy. The appliance is not sup-
ported properly. Check if the appliance stands
stable.
Audible or visual alarm is on. The cabinet has been re-
cently switched on or the
temperature is still too high. Refer to "Door Open Alarm"or
"High Temperature Alarm".
The temperature in the ap-
pliance is too high. Refer to "Door Open Alarm"or
"High Temperature Alarm".
The door is left open. Close the door.
The temperature in the ap-
pliance is too high. Contact a qualified electrician
or contact the nearest Author-
ised Service Centre.
A rectangular symbol is
shown instead of numbers
on the Temperature Display. Temperature sensor prob-
lem. Contact the nearest Authorised
Service Centre (the cooling sys-
tem will continue to keep food
products cold, but temperature
adjustment will not be possi-
ble).
The lamp does not work. The lamp is in stand-by. Close and open the door.
The lamp does not work. The lamp is defective. Contact the nearest Authorised
Service Centre.
The compressor operates
continually. Temperature is set incor-
rectly. Refer to "Operation" chapter.
Many food products were
put in at the same time. Wait some hours and then
check the temperature again.
The room temperature is
too high. Refer to climate class chart on
the rating plate.
Food products placed in
the appliance were too
warm. Allow food products to cool to
room temperature before stor-
ing.
30