CAUTION! Rough handling of
the glass, especially around the
edges of the front panel, can
cause the glass to break.
7. Pull the door trim to the front to
remove it.
8. Hold the door glass panels on their top
edge one by one and pull them up out
of the guide.
9. Clean the glass panel with water and
soap. Dry the glass panel carefully.
When the cleaning is completed, do the
above steps in the opposite sequence.
Install the smaller panel first, then the
larger and the door.
WARNING! Make sure that the
glasses are inserted in the
correct position otherwise the
surface of the door may
overheat.
Replacing the lamp
WARNING! Risk of electric
shock.
The lamp can be hot.
1. Turn off the oven.
Wait until the oven is cooled down.
2. Disconnect the oven from the mains.
3. Put a cloth on the bottom of the cavity.
The top lamp
1. Turn the lamp glass cover to remove it.
2. Remove the metal ring and clean the
glass cover.
3. Replace the lamp with a suitable
300 °C heat-resistant lamp.
4. Attach the metal ring to the glass
cover.
5. Install the glass cover.
TROUBLESHOOTING
WARNING! Refer to Safety
chapters.
What to do if...
Problem
Possible cause
Remedy
You cannot activate or oper‐
ate the oven.
The oven is not connected
to an electrical supply or it is
connected incorrectly.
Check if the oven is correct‐
ly connected to the electrical
supply (refer to the connec‐
tion diagram if available).
The oven does not heat up.
The oven is deactivated.
Activate the oven.
The oven does not heat up.
The clock is not set.
Set the clock.
The oven does not heat up.
The necessary settings are
not set.
Make sure that the settings
are correct.
50
Содержание 944182408
Страница 1: ...JBD167D0 JBD167D2 User Manual EN Steam oven...
Страница 55: ......
Страница 56: ...867353479 B 262021...