Junkers Cerapur 9000i, Руководство по установке и обслуживанию

Страница: 27 / 45

TUNG)
When connecting a heating controller with a 2-wire BUS,
the heating controller optimizes this setting.
LOCK TIME
Table 18 INFO menu
HYDR. SOFT
Settings/setting range
Remark/Restriction
• EXT. HEATING PUMP BEHIND HYDR.
–
Difference between the current flow temperature and the
set flow temperature until the burner is switched on
PUMP MAP
• NL
• KESSEL
ÿ Measure the gas flow rate.
Settings/setting range
menu item
• Setting range: ÿ Settings in:
SYSTEM
HYDRAULICS
• DELTA-P CONTROLLED 1: constant pressure
• DELTA-P CONTROLLED 2: constant pressure
• DELTA-P CONTROLLED 3: constant pressure
• DELTA-P CONTROLLED 4: constant pressure
• DELTA-P CONTROLLED 5: constant pressure
• DELTA-P CONTROLLED 6: constant pressure
10.2.2 SETTINGS
PUMP BOILER
• 3 … 10 … 60 minutes
… -6 … -30 Kelvin • -2
menu item
• POWER-BASED: Pump power proportional to the
heat output (ÿ>SETTINGS > PUMP > MIN.
POWER and >
• NF
• MODULE
ÿ Compare the measurement result with the gas data
tables (ÿ page 10).
• NO
VERSE. CONTROL UNIT
PUMP IN PW2
>LIMIT VALUES > MIN. EQUIPMENT. and
Tab. 19 SETTINGS menu
–
PUMP
When connecting a heating controller with a 2-wire BUS,
the heating controller optimizes this setting.
Maximum released heat output [kW].
Remark/Restriction
SOFT
TAKTSPERRE TEMP.
HEATING
ÿ In order to save energy and to keep any flow noises low,
set a low pump characteristic (residual head ÿ Page 10).
ÿ Correct deviations.
CODED NUMBER
The time interval defines the minimum waiting time between
switching the burner on and switching it on again.
CODED VERSION.
• JA
VER. CONTROL UNIT
• CIRCULATION PUMP
>LIMITS > MAX. HEAT POWER.
For natural gas appliances:
–
• NO
MAX. HEATING CAPACITY
Settings in the service menu | 27
SETTINGS > PUMP > MAX. QUIET
ners.
6720813052 (2016/10)
Cerapur GC9000iW
Machine Translated by Google