Juniper SECURITY THREAT RESPONSE MANAGER - LOG MANAGEMENT INSTALLATION REV 1, Руководство по установке

Страница: 26 / 30

STRM Installation Guide
22 C
HANGING
N
ETWORK
S
ETTINGS
Changing the
Network Settings
To change the network settings, you must:
Step 1
Log in to the non-Console as root.
Step 2
Enter the following command:
qchange_netsetup
The Network Settings window appears.
Step 3
Using the up/down arrow keys to navigate the fields, make the necessary changes
to the following parameters:
• Hostname — Specify a fully qualified domain name as the system hostname.
•
IP Address - Specify the IP address of the system.
•
Netmask - Specify the network mask address for the system.
•
Gateway - Specify the default gateway of the system.
• Primary DNS - Specify the primary DNS server.
•
Secondary DNS - Optional. Specify the secondary DNS server.
•
Public IP - Optional. Specify the Public IP address of the server. This is a
secondary IP address that is used to access the server, usually from a different
network or the Internet, and is managed by your network administrator. This
Public IP address is often configured using Network Address Translation (NAT)
services on your network or firewall settings on your network. NAT translates an
IP address in one network to a different IP address in another network.
•
Email Server - Specify the email server. If you do not have an email server,
specify localhost in this field.
Step 4
Use the TAB key to move to the Finish option. Press Enter .
A series of messages appear as STRM-LM processes the requested changes.
After the requested changes are processed, the STRM-LM system is automatically
shutdown and rebooted.
Re-Adding the
Managed Host and
Re-Assigning the
Components
To re-add the managed host and re-assign component(s), you must:
Step 1
Log in to STRM-LM and access the System View in the Deployment Editor, as
defined in
Step 1, Removing the Non-Console Managed Host .
Re-add managed host to your deployment.
Step 2
From the menu, select Actions > Add a managed host .
The Add a new host wizard appears.
Step 3
Click Next .
The Enter the host’s IP window appears.
Step 4
Enter values for the parameters: