Juniper SECURITY THREAT RESPONSE MANAGER - LOG MANAGEMENT INSTALLATION REV 1, Руководство по установке

Страница: 24 / 30

STRM Installation Guide
20 C
HANGING
N
ETWORK
S
ETTINGS
Re-Adding Managed
Host(s) and
Re-Assigning the
Components
To re-add the managed host(s) and re-assign component(s), you must:
Step 1
Log in to STRM-LM and access the System View in the Deployment Editor, as
defined in
Step 1, Removing Non-Console Managed Hosts .
Re-add managed host(s) to your deployment.
Step 2
From the menu, select Actions > Add a managed host .
The Add a new host wizard appears.
Step 3
Click Next .
The Enter the host’s IP window appears.
Step 4
Enter values for the parameters:
•
Enter the IP of the server or appliance to add — Specify the IP address of
the host you wish to add to your System View.
•
Enter the root password of the host — Specify the root password for the
host.
•
Confirm the root password of the host — Specify the password again, for
confirmation.
Step 5
Click Next .
Step 6
Click Finish .
Step 7
Re-assign all components to your non-Console managed host.
a
In the STRM-LM Deployment Editor, click the Flow View or Event View tab.
b
Select the component you wish to re-assign to the managed host.
c
From the menu, select Actions > Assign
Note: You can also use the right mouse button (right-click) to access the Actions
menu items.
The Assign Component wizard appears.
d
From a Select a host drop-down list box, select the host you wish to re-assign
to this component. Click Next .
e
Click Finish .
Step 8
Repeat for each non-Console managed host until all hosts are re-added and
re-assigned.
Step 9
From the Administrative Console menu, select Configurations > Deploy
Configuration Changes .
Changes are deployed.