Juniper MX480 Скачать руководство пользователя страница 251

Страница: 251 / 420

Copy Junos OS to the newly replaced SSD:

If both the SSDs are replaced together:

a. Install using an USB disk:

Insert the USB disk in the

USB

slot on the Routing Engine.

After the Routing Engine boots from the USB, press

when you are prompted

to confirm

Install vmhost and Junos software on Primary and Secondary disk

[y/N?

on the console.

After the installation is completed, press

when prompted to confirm

Reboot

now? [y/N]?

to reboot from the SSD disk.

NOTE:

To prepare a bootable USB disk, see Creating an Emergency

Boot Device for Routing Engines with VM Host Support.

b. Install vmhost using the PXEBoot method:

Set up the PXEBoot server. See

Copying VM Host Installation Package to the

PXE Boot Server

Bring the Routing Engine online by pressing the ONLINE/OFFLINE button

During the boot, when you see the message

Press Esc for boot options

press

Esc

key to enter into the BIOS menu boot options.

After the

Esc

key is pressed,

Esc is pressed. Go to boot options.

is displayed on

the screen.

Using

Down

arrow keys, navigate to

Boot Manager

and press the

Enter

key.

Using

Down

arrow keys, navigate through the EFI boot devices listed and

select

EFI Network 0 for IPv4

to boot from the PXEboot server and press the

Enter

key.

Booting `net boot console

is displayed and PXEBoot continues.

NOTE:

The booting process may take several minutes.

After the Routing Engine boots, press

when you are prompted to confirm

Install

vmhost and Junos software on Primary and Secondary disk [y/N?

on the console.

After the installation is completed, press

when prompted to confirm

Reboot

now? [y/N]?

to reboot from the SSD disk.

If only disk2 is replaced:

a. Bring the Routing Engine online by pressing the ONLINE/OFFLINE button.

b. The router boots from disk1. To be able to boot from disk2:

251

Chapter 4: Maintaining Components

Содержание MX480



























































































































































































































































































































































































































Результаты поиска

Содержание MX480

Отзывы:

Juniper MX480, Руководство по оборудованию, Страница: 251 / 420

Результаты поиска

Содержание MX480

Отзывы: