Juniper MX104, Быстрый старт, Страница: 13 / 30

2. Plug the RJ-45 end of the serial cable into the CONSOLE port on the Routing Engine ( Figure 7 on page 13
shows the connector. Figure 8 on page 13 shows the ports.)
3. Plug the female DB-9 end into the device's serial port.
NOTE:
For console devices, configure the serial port to the following values:
•
Baud rate—9600
•
Parity—N
•
Data bits—8
•
Stop bits—1
•
Flow control—none
Figure 7: Routing Engine Console Cable Connector
Figure 8: Console Connections
g006423
Console Server PC
CONSOLE/AUX
port
Connect MIC Cables to the MX104 Router
1. Have ready a length of the type of cable used by the component. For MIC cable specifications, see the
MX Series Interface Module Reference .
2. Remove the rubber safety plug from the cable connector port.
13