69
Appendix A
System Maximums
This appendix presents current system maximums for various E Series hardware
configurations. An E Series router does not simultaneously support all maximum
configurations.
For some entries, early field trial (EFT) values are presented in addition to supported
values. These values have not been fully qualified by Juniper Networks and are
mentioned only for field test purposes in this release. EFT values are enclosed
within parentheses with an EFT designation; for example, (96,000 EFT).
Modules referred to in the tables are identified by their physical label. For module
specifications, including their identifying labels, see
ERX Module Guide, Table 1,
Module Combinations
and
E120 and E320 Module Guide, Table 1, Modules and IOAs
.
System Maximums for ERX310,
ERX7xx, and ERX14xx
Section
General router values
General System Maximums on page 70
Physical layer values
Physical and Logical Density Maximums on page 71
Link layer values
Link Layer Maximums on page 74
Routing protocol and performance values
Routing Protocol Maximums on page 79
Policy and QoS values
Policy and QoS Maximums on page 83
Tunneling values
Tunneling Maximums on page 85
Subscriber management values
Subscriber Management Maximums on page 87
System Maximums for E120 and E320
Routers
Section
General router values
General System Maximums on page 90
Physical layer values
Physical and Logical Density Maximums on page 91
Link layer values
Link Layer Maximums on page 93
Routing protocol and performance values
Routing Protocol Maximums on page 99
Policy and QoS values
Policy and QoS Maximums on page 102
Tunneling values
Tunneling Maximums on page 106
Subscriber management values
Subscriber Management Maximums on page 108
