Configuring the IP Address and Domain Name Servers
To configure the JATP network settings, enter the values for the following parameters:
NOTE:
Use the up or down arrow keys to navigate the fields.
1.
Type the IP address of the management interface (eth0).
2.
Enter the network mask address for the eth0 interface.
3.
Enter the default gateway for the eth0 interface.
4.
Enter the primary DNS server for the eth0 interface.
5.
(Optional) Type
Yes
and enter the IP address of the secondary DNS server for the eth0 interface.
6.
(Optional) Type
Yes
and enter the search domain for the eth0 interface. For example, example.com.
NOTE:
Provide a space to enter multiple search domains.
7.
Type
Yes
and press
Enter
to restart the management (eth0) interface.
NOTE:
The network interface restart can take up to more than 60 seconds.
Configuring the Device Host Name
To configure the device host name:
1.
Enter a valid hostname. For example, JATP700.
NOTE:
Enter a unique name for the host and do not include the domain.
Updates server to JATP700.example.com.
2.
Type
Yes
to create a new SSL certificate for the JATP Appliance Server Web UI.
NOTE:
If you decline the self-signed certificate by entering
No
, the JATP700 appliance will continue to use the
existing certificates. These certificates might contain an incorrect hostname or fully qualified domain name
(FQDN). To resolve this issue on the Web UI, regenerate a new self-signed SSL certificate or upload your private
key and certificate. For more information on the certificates, see the Managing Certificates section in the Operator’s
Guide.
SSL self-signed certificate is regenerated successfully and the hostname will be updated after the next login.
Copyright © 2018, Juniper Networks, Inc.
6
How to Set Up Your JATP700 Appliance
