J-series Services Router Quick Start
4
!
Installing a Services Router
If you are installing a J4350 or J6350 Services Router, take the following steps:
1.
Attach the air filter and filter cover, as shown in Figure 1.
Figure 1: Attaching Air Filter and Filter Cover
2.
Attach the mounting brackets to either the center or front of the chassis, as
shown in Figure 2.
Figure 2: Attaching Mounting Brackets
Installing a Services Router
Installing a J2300 Services Router
To install a J2300 Services Router on a desk, attach the rubber feet to the underside
of the chassis.
g003819
POWER
PO
W
ER
ST
AT
US
AL
AR
M
HA
RESET
CONFIG
PORT 0
STATUS
Air filter
Filter cover
Cover latches
g003860
WARNING:
A DC-powered J2300 Services Router is intended for installation in a
dedicated equipment room where it is accessible by trained personnel only. Other
DC-powered Services Routers are intended for installation in a restricted access
location.
