Juniper J-Series, Быстрый старт

Страница: 11 / 24

Basic Connection and Configuration with the CLI
! 11
J-series Services Router Quick Start
7. At the % prompt, type the cli command and press Enter. The prompt changes
to an angle bracket (>) when you enter CLI operational mode.
root@%
cli
root>
For complete instructions, see the Getting Started Guide for your router.
2. Updating the JUNOS Software with the CLI
After starting up the Services Router, you might want to download the latest version
of the JUNOS software from the Juniper Networks Web site and load it onto the
router. You can use the CLI, but we recommend the J-Web interface for the
download.
To update the JUNOS software with the CLI:
1. Go to http://www.juniper.net/support , and follow the links to download the
JUNOS software for J-series routers to an FTP server.
2. Download the JUNOS software to the router with the CLI or J-Web interface:
root> request system software add validate unlink reboot source
For complete instructions, see the J-series Services Router Administration Guide .
3. Adding Licenses with the CLI
If you purchased one or more licenses, you received an envelope with instructions
for obtaining license keys from the Web. To enable each license on the router, you
must add the license key. You can add one or more license keys from the CLI.
To add a license key and enable a license:
1. Follow the instructions in your license envelope to generate the license key
from the Web site.
2. Copy the license key onto the router with the CLI:
a. Type the following command, and press Enter:
root> request system license add terminal
b. When prompted, copy and paste the license key from the Web site at the
command line, separating multiple license keys with a blank line.
c. To exit license key entry, press Ctrl+D.
For complete instructions, see the Getting Started Guide for your router.