Juniper EX9200 Series, Руководство по функциям

Страница: 166 / 278

Table 10: Three-Color Policer Configuration and Application Overview (continued)
Key Points Layer 3 Application Policer Configuration
Basic Two-Rate Three-Color Policer
Defines traffic rate limiting that you can apply to Layer 3 protocol-specific traffic at a logical interface. Can be applied as a
firewall filter policer only.
Provides moderate allowances for sustained periods of traffic that exceed the committed bandwidth limit or burst size.
Policer configuration:
Reference the policer from a firewall filter, and
apply the filter to a protocol family on a logical
interface:
[edit firewall]
Basic two-rate TCM policer
configuration:
[edit firewall]
three-color-policer policer-name {
two-rate
{
• Include the
two-rate
(color-aware | color-blind)
statement.
family family-name {
Firewall filter configuration:
(color-aware | color-blind);
committed-information-rate
bps;
filter filter-name {
term term-name {
from {
•
Include the three-color-policer
two-rate policer-name
action.
committed-burst-size bytes;
... match-conditions ...
peak-information-rate bps;
}
Applying the firewall filter to the
logical interface:
peak-burst-size bytes;
}
action {
then {
three-color-policer {
two-rate policer-name;
• Include the
filter (input |
output) filter-name
statement.
loss-priority high then discard;
}
}
}
}
}
}
}
[edit interfaces]
interface-name {
unit unit-number {
family family-name {
filter {
input filter-name;
output filter-name;
}
}
}
}
Related
Documentation
•
Three-Color Policer Configuration Guidelines on page 149
•
Basic Single-Rate Three-Color Policers on page 153
•
Basic Two-Rate Three-Color Policers on page 161
•
Two-Color and Three-Color Logical Interface Policers on page 171
•
Two-Color and Three-Color Physical Interface Policers on page 185
Copyright © 2016, Juniper Networks, Inc. 148
Traffic Policers Feature Guide for EX9200 Switches