Juniper EX9200 Series, Руководство по функциям

Страница: 130 / 278

NOTE: The firewall filter passes the prefix-specific action only packets with
source addresses that range from 10.10.10.0 through 10.10.10.127 , while the
prefix-specific action specifies a set of 256 counters and policers, numbered
from 0 through 255.
The matched packets that are passed to the prefix-specific action index into the lower
half of the counter and policer set only:
•
The first counter and policer in the set are indexed by packets with source address
10.10.10.0
.
• The second counter and policer in the set are indexed by packets with source address
10.10.10.1 and 10.10.10.129 .
• The 128th counter and policer in the set are indexed by packets with source address
10.10.10.127
.
•
The upper half of the set (instances numbered from 128 through 255) are not indexed
by packets passed to the prefix-specific action from this particular firewall filter.
The following configuration shows the statements for configuring the single-rate two-color
policer, the prefix-specific action that references the policer, and the IPv4 standard
stateless firewall filter that references the prefix-specific action:
[edit]
firewall {
policer 1Mbps-policer {
if-exceeding {
bandwidth-limit 1m;
burst-size-limit 63k;
}
then discard;
}
family inet {
prefix-action psa-1Mbps-per-source-24-32-256 {
policer 1Mbps-policer;
subnet-prefix-length 24;
source-prefix-length 32;
}
filter limit-source-one-25 {
term one {
from {
source-address {
10.10.10.0/ 25 ;
}
}
then prefix-action psa-1Mbps-per-source-24-32-256;
}
}
}
}
interfaces {
so-0/0/2 {
Copyright © 2016, Juniper Networks, Inc. 112
Traffic Policers Feature Guide for EX9200 Switches