Juniper CTP151 Platform, Руководство по оборудованию, Страница: 98 / 104

Packing a CTP151 Device for Shipping
To pack a CTP151 device for shipping:
1. Power off the CTP151 device and remove the power cables. See “Powering Off the CTP151 Device”
on page 80 .
2. Remove the cables that connect the device to all external devices.
3. Remove all field-replaceable units (FRUs) from the CTP151 device.
4. Have one person support the weight of the device while another person unscrews and removes the
mounting screws.
5. Remove the device from the rack or cabinet and place the device in an antistatic bag.
6. Place the device in the shipping carton.
7. Place the packing foam on top and around the device.
8. If you are returning accessories or FRUs with the device, pack them as instructed in “Packing a CTP151
Device or Component for Shipping” on page 91 .
9. Replace the accessory box on top of the packing foam.
10. Close the top of the cardboard shipping box and seal it with packing tape.
11. Write the RMA number on the exterior of the box to ensure proper tracking.
Packing CTP151 Device Components for Shipping
CAUTION: Do not stack the CTP151 device components. Return individual components
in separate boxes if they do not fit together on one level in the shipping box.
To pack and ship CTP151 device components:
•
Place individual FRUs in antistatic bags.
•
Ensure that the components are adequately protected with packing materials and packed so that the
pieces are prevented from moving around inside the carton.
92