Juniper CTP151 Platform Скачать руководство пользователя страница 39

Страница: 39 / 104

USB Port Specifications for a CTP151 Device

The following Juniper Networks USB flash drives have been tested and are officially supported for the

USB port in the CTP151 device:

•

RE-USB-1G-S—1-gigabyte (GB) USB flash drive

•

RE-USB-2G-S—2-GB USB flash drive

•

RE-USB-4G-S—4-GB USB flash drive

CAUTION:

Any USB memory product not listed as supported for the CTP151 device

has not been tested by Juniper Networks. The use of any unsupported USB memory

product could expose your device to unpredictable behavior. Juniper Networks

Technical Assistance Center (JTAC) can provide only limited support for issues related

to unsupported hardware. We strongly recommend that you use only supported USB

flash drives.

CAUTION:

Remove the USB flash drive before upgrading CTPOS or rebooting the

CTP151 device. Failure to do so could expose your device to unpredictable behavior.

NOTE:

USB flash drives used with the CTP151 device must support USB 2.0 or later.

NOTE:

If the CTP151 device does not boot from the internal SSD drive, you must reinstall the

CTPOS software using a USB installation image.

Содержание CTP151 Platform









































































































Результаты поиска

Содержание CTP151 Platform

Отзывы:

Juniper CTP151 Platform, Руководство по оборудованию, Страница: 39 / 104

Результаты поиска

Содержание CTP151 Platform

Отзывы: