JUNIOR JONES J-SPIRIT, Инструкция по эксплуатации

Страница: 10 / 14

J-SPIRIT Instruction Manual
J-SPIRIT Instruction Manual
28 29
CAUTION: always remove the car seat adaptors before folding the chassis.
The J-SPIRIT has been designed and tested for use with a variety of
leading car seat brands. For full details please visit the Support section
on our website; www.juniorjones.com or check with your local
experience centre.
WARNING :
only use car seats which have been approved by
JUNIORJONES.
18. Folding the J-SPIRIT
Lift the seat section of the seat unit upwards to meet the back rest
(fig. 47 & 48) . Drop the seat unit to the rear of the chassis (fig. 49 & 50) .
Ensure the handle bar is in the lowest height position. Firmly twist the
barrel on the handle bar towards yourself to release the locking
mechanism and drop the handle bar to the rear legs (fig. 51, 52 & 53) .
In the shopping basket, press the button (fig. 54) to release the
secondary locking mechanism and lift the barrel shaped handle
upwards (fig. 55) .
Bring the front wheels in towards the rear wheels and lock them into
the lugs (fig. 56) .
Your J-SPIRIT will free-stand when folded and the front wheels are
locked into the lugs correctly (fig. 57) .
Care and maintenance
• Regularly check screws, rivets, bolts and fastenings to ensure they
are locked tight and secure.
• Replace any parts in an inferior condition.
• Always apply the brake when stationary/leaving the stroller and
when inserting or removing your child from the stroller.
• When using this product during the winter, by the sea or off-road it is
important to clean using clean fresh water and dry thoroughly. Salt water
and salt and grit from the roads will corrode metal parts unless removed.
• Check on a regular basis that all chassis locking devices are working
correctly.
• If any part of the product is damaged, contact our Customer Services
Team immediately.
• Do not expose to excessive sunlight for extended periods of time,
even normal exposure to sunlight may cause change to the colour of
the fabrics.
• Light oil or silicone spray can be used to lubricate moving parts.
• Ensure zips are either fully open or closed to prevent damage.