Jungheinrich ETV 110 Скачать руководство пользователя страница 82

Страница: 82 / 157

. .

E 30

Safety instructions for sideshifter and fork adjuster

Safety instructions for sideshifter and fork adjuster attachments

attachments

When using multi fork adjusters (multi

When using multi fork adjusters (multi pallet clamps), restricted visibility and reduced

pallet clamps), restricted visibility and reduced

lateral tilt resistance can result in accidents.

–

– Adapt the travel speeds to the visibility and load.

Adapt the travel speeds to the visibility and load.

–

– Make sure you have enough visibility when travelling in the forks direction.

Make sure you have enough visibility when travelling in the forks direction.

Safety instructions for clamping attachments (e.g. baling clamps, barrel

Safety instructions for clamping attachments (e.g. baling clamps, barrel
clamps, grabs etc.)

clamps, grabs etc.)

Falling loads can cause accidents

Falling loads can cause accidents
This can result in malfunctions and

This can result in malfunctions and the load can fall accidentally.

the load can fall accidentally.

–

– Clamping

Clamping attachments

attachments must

must only

only be

be operated

operated on

on trucks

trucks will

will auxiliary

auxiliary hydraulics

hydraulics

HF4 or HF5.

–

– When

When connecting

connecting the

the attachment

attachment make

make sure

sure that

that the

the hydraulic

hydraulic lines

lines of

of the

the

attachment are connected to the right ports, see "Assembly and hydraulic ports of

attachment are connected to the right ports, see "Assembly and hydraulic ports of
additional attachments” in chapter E.

additional attachments” in chapter E.

–

– An auxiliary button for releasing the clamp opening must be used.

An auxiliary button for releasing the clamp opening must be used.

Safety instructions for rotary attachments

A non-centred centre of gravity can result in accidents

When using rotary devices and non-centred loads, the centre of gravity can be

When using rotary devices and non-centred loads, the centre of gravity can be
displaced from the centre with a

displaced from the centre with a high risk of accidents.

high risk of accidents.

–

– Adapt the travel speed to the load.

Adapt the travel speed to the load.

–

– Lift the load from the centre.

Lift the load from the centre.

Safety instructions for telescopic attachments

Accident risk from increased tipover hazard and reduced residual capacity

There is a greater tipover risk with extended telescopic attachments (e.g. reach

There is a greater tipover risk with extended telescopic attachments (e.g. reach
carriages, telescopic forks, telescopic crane booms).

carriages, telescopic forks, telescopic crane booms).

–

– Only use the telescopic function for stacking and retrieving.

Only use the telescopic function for stacking and retrieving.

–

– Always retract the attachment fully during transport.

Always retract the attachment fully during transport.

–

– Adapt the travel speed to changed load centre of gravity.

Adapt the travel speed to changed load centre of gravity.

https://www.besttruckmanuals.com/

Содержание ETV 110






























































































































































Результаты поиска

Содержание ETV 110

Отзывы:

Бренды по названию

Популярные бренды

Jungheinrich ETV 110, Руководство по эксплуатации

Результаты поиска

Содержание ETV 110

Отзывы:

Бренды по названию

Популярные бренды