Jungheinrich ETV 110, Руководство по эксплуатации

Страница: 140 / 157

0 0
3 3
. .
1 1
3 3
E E
N N
4 4
3. 3. Not permis Not permissible as oper sible as operating temp ating temperatu erature. re.
4 4..2 2 O Op pe erra attiio on n
4.2 4.2.1 .1 Com Commis missio sionin ning un g unfill filled b ed batt atteri eries es
Z Z
The operations required must be carried out by the manufacturer's customer The operations required must be carried out by the manufacturer's customer
service department or a customer service organisation authorised by the service department or a customer service organisation authorised by the
manufacturer. manufacturer.
4.2 4.2.2 .2 Com Commis missio sionin ning fille g filled and ch d and charg arged bat ed batter teries ies
Checks and operations to be performed before starting daily work Checks and operations to be performed before starting daily work
Procedure Procedure
•• Make s Make sure the b ure the battery i attery is in phy s in physical sically goo ly good cond d condition. ition.
•• Make su Make sure the re the terminals are terminals are correct (positive correct (positive to positive to positive and negativ and negative to n e to negative) egative)
and check that contacts on the and check that contacts on the battery terminal conducting system are secure. battery terminal conducting system are secure.
•• Chec Check the termi k the terminal scre nal screw torque w torques (M10 = 23 ±1 Nm) of the term s (M10 = 23 ±1 Nm) of the terminal con inal conduct ductors and ors and
connectors. connectors.
•• Ch Char arge u ge up th p the ba e batte ttery ry..
•• Che Check t ck the e he elec lectro trolyt lyte lev e level. el.
Z Z
The electrolyte level must be above the cell baffle or the top of the separator. The electrolyte level must be above the cell baffle or the top of the separator.
•• Add ele Add electroly ctrolyte with di te with distille stilled water up t d water up to the nom o the nominal le inal level. vel.
Checks completed. Checks completed.
4. 4.2. 2.3 3 Di Disc scha harg rgin ing th g the ba e batte ttery ry
Z Z
To achieve an optimum useful life avoid operational discharge of more than 80% of To achieve an optimum useful life avoid operational discharge of more than 80% of
nominal capacity (full discharge). This corresponds to a minimum electrolyte
nominal capacity (full discharge). This corresponds to a minimum electrolyte
density of 1.13 kg/l at the end of the discharge. Recharge a discharged battery
density of 1.13 kg/l at the end of the discharge. Recharge a discharged battery
immediately.
immediately.
https://www.besttruckmanuals.com/