Jungheinrich ESE 220, Руководство по эксплуатации

Страница: 78 / 170

6 Operating the truck without its own drive system
WARNING!
Accidental truck movement
When the brakes are de-activated the truck
must be parked on a level surface, since the
brakes are no longer effective.
u Do not release the brake on slopes or
inclines.
u Do not park the truck with the brake
released.
u
Apply the brake again when you reach your
destination.
Releasing the brake
Tools and Material Required
– Two M5x45 screws
– Spanner wrench
Procedure
• Switch off the truck, to do this:
• Turn the key in the key switch (6) anti-
clockwise as far as it will go. Remove the
key from the key switch (6).
• For CanCode (8)(
o
) press the O key.
• Press the red button on the ISM access
module(
o
).
• Press the Emergency Disconnect switch
(11).
• Disconnect the battery.
• Use wedges to prevent the truck from
moving.
• Remove the drive compartment cover, see
page 117.
• Insert two M5x45 screws (61) as far as the
stop and lift up the anchor plate.
61
6,8 11
78
04.19 en-GB