Jungheinrich ERC 212 Скачать руководство пользователя страница 92

Страница: 92 / 125

brriic

ntts a

s an

nd L

d Lu

brriic

attiio

on S

n Sc

ulle

5.1

Hand

ndli

ling

ng co

cons

nsum

umab

able

les s

s saf

afel

ely

Handling consumables

Consumables must always be handled correctly. Follow the manufacturer’s

Consumables must always be handled correctly. Follow the manufacturer’s
instructions.

instructions.

WARNING!

Improper handling is hazardous to health, life and the environment

Consumables can be flammable.



Keep consumables away from hot components

Keep consumables away from hot components and naked flames.

and naked flames.



Always keep consumables in prescribed containers.



Always fill consumables in clean containers.



Do not mix up different grades of consumable. The only exception to this is when

Do not mix up different grades of consumable. The only exception to this is when
mixing is expressly stipulated in the operating

mixing is expressly stipulated in the operating instructions.

instructions.

CAUTION!

Spilled liquids can cause slipping and endanger the environment

Risk of slipping from spilled liquids. The risk is greater when combined with water.



Do not spill fluids.



Spilled fluids must be removed immediately

Spilled fluids must be removed immediately with an appropriate bonding agent.

with an appropriate bonding agent.



The bonding agent / consumable mixture must be disposed of in accordance with

The bonding agent / consumable mixture must be disposed of in accordance with
regulations.

regulations.

WARNING!

Oils (chain spray / hydraulic oil) are flammable and poisonous.



Dispose of used oils in accordance with regulations. Store used oil safely until

Dispose of used oils in accordance with regulations. Store used oil safely until it can

it can

be disposed of in accordance with regulations.



Do not spill oil.



Spilled fluids must be removed immediately

Spilled fluids must be removed immediately with an appropriate bonding agent.

with an appropriate bonding agent.



The bonding agent / consumable mixture must be disposed of in accordance with

The bonding agent / consumable mixture must be disposed of in accordance with
regulations.

regulations.



Observe national regulations when handling oils.



Wear safety gloves when handling oils.



Prevent oil from coming into contact with hot motor parts.



Do not smoke when handling oil.



Avoid contact and digestion. If you

Avoid contact and digestion. If you swallow oil do not induce vomiting but call

swallow oil do not induce vomiting but call for a

for a

doctor immediately.



Seek fresh air after breathing in oil fumes or vapours.



If oil has come into contact with your skin, rinse your skin with water.



If oil has come into contact with your eyes, rinse them with water and call for a

doctor immediately.



Replace oil-soaked clothing and shoes immediately.

https://www.besttruckmanuals.com/

Содержание ERC 212






























































































































Результаты поиска

Содержание ERC 212

Отзывы:

Бренды по названию

Популярные бренды

Jungheinrich ERC 212, Руководство по эксплуатации

Результаты поиска

Содержание ERC 212

Отзывы:

Бренды по названию

Популярные бренды