Jungheinrich ERC 212, Руководство по эксплуатации

Страница: 36 / 125

35 35
0 0
3 3
. .
1 1
1 1
E E
N N
4 4 C Ch ha arrg giin ng g tth he e b ba atttte erry y
WARNING! WARNING!
The gases produced during charging can cause explosions The gases produced during charging can cause explosions
The battery produces a mixture of nitrogen and hydrogen (electrolytic gas) during The battery produces a mixture of nitrogen and hydrogen (electrolytic gas) during
charging. Gassing is a chemical process. This gas mixture is highly explosive and
charging. Gassing is a chemical process. This gas mixture is highly explosive and
must not be ignited.
must not be ignited.
 
Switch the charging station and truck off first before connecting/disconnecting the Switch the charging station and truck off first before connecting/disconnecting the
charging cable of the battery charging station to/from the battery connector. charging cable of the battery charging station to/from the battery connector.
 
The charger must be adapted to the battery in terms of voltage and charge The charger must be adapted to the battery in terms of voltage and charge
capacity.
capacity.
 
Before charging, check all cables and plug connections for visible signs of damage. Before charging, check all cables and plug connections for visible signs of damage.
 
Ventilate the room in which the truck is being charged. Ventilate the room in which the truck is being charged.
 
The battery cover must be open and the battery cell surfaces must be exposed The battery cover must be open and the battery cell surfaces must be exposed
during charging to ensure adequate ventilation.
during charging to ensure adequate ventilation.
 
Do not smoke and avoid naked flames when handling batteries. Do not smoke and avoid naked flames when handling batteries.
 
Wherever an industrial truck is parked for charging there shall be no inflammable Wherever an industrial truck is parked for charging there shall be no inflammable
material or lubricants capable of creating sparks within 2 m around the truck.
material or lubricants capable of creating sparks within 2 m around the truck.
 
Fire protection equipment must be on hand. Fire protection equipment must be on hand.
 
Do not lay any metallic objects on battery. Do not lay any metallic objects on battery.
  It is essential to follow the safety regulations of the battery and charger station It is essential to follow the safety regulations of the battery and charger station
manufacturers. manufacturers.
Charging the battery Charging the battery
Requirements Requirements
– – Park the truck on a level surface. Park the truck on a level surface.
– – Expose the battery, (see "Exposing the battery" on page Expose the battery, (see "Exposing the battery" on page 33). 33).
– – Disconnect the battery Disconnect the battery
Procedure Procedure
•• Remove t Remove the batte he battery conne ry connector (43 ctor (43) from the p ) from the plug conn lug connection o ection on the truc n the truck (42). k (42).
•• Remove Remove any i any insulat nsulating m ing mats f ats from t rom the ba he battery. ttery.
•• Connec Connect the charg t the charger lead of the b er lead of the battery ch attery charger sta arger station to the b tion to the battery co attery connecto nnector r
(43). (43).
•• Switch Switch on the c on the charger harger. Charg . Charging beg ing begins aut ins automatic omatically. ally.
The battery is now charged. The battery is now charged.
https://www.besttruckmanuals.com/