Jungheinrich ERC 212, Руководство по эксплуатации

Страница: 12 / 125

11 11
0 0
3 3
. .
1 1
1 1
E E
N N
A A Correct Use a Correct Use and Applica nd Application tion
1 1 G Ge en ne erra all
The industrial truck described in the present operating instructions is designed for The industrial truck described in the present operating instructions is designed for
lifting, lowering and transporting load units.
lifting, lowering and transporting load units.
It must be used, operated and serviced in accordance with the present instructions.
It must be used, operated and serviced in accordance with the present instructions.
Any other type of Any other type of use is beyond the use is beyond the scope of application and scope of application and can result in da can result in damage to mage to
personnel, the industrial truck or property. personnel, the industrial truck or property.
2 2 C Co orrrre ec ct a t ap pp plliic ca attiio on n
NOTE NOTE
The maximum load and load distance are The maximum load and load distance are indicated on the load chart and must not indicated on the load chart and must not be be
exceeded. exceeded.
The load must rest on the
The load must rest on the load handler or be lifted by load handler or be lifted by an attachment approved by the an attachment approved by the
manufacturer. manufacturer.
The load must rest on the back of the fork carriage and centrally between the forks.
The load must rest on the back of the fork carriage and centrally between the forks.
– – Lifting and lowering of loads. Lifting and lowering of loads.
– – Transporting lowered loads. Transporting lowered loads.
– – Do not travel with a raised load (>500 mm). Do not travel with a raised load (>500 mm).
– – Do not carry or lift passengers. Do not carry or lift passengers.
– – Do push or pull load units. Do push or pull load units.
3 3 A Ap pp prro ov ve ed d a ap pp plliic ca attiio on n c co on nd diittiio on ns s
– – Operation in industrial and commercial environments. Operation in industrial and commercial environments.
– – Permissible temperature range +5°C to +40°C. Permissible temperature range +5°C to +40°C.
– – Operation only on secure, level surfaces with sufficient capacity. Operation only on secure, level surfaces with sufficient capacity.
– – Operation only on routes that are visible and approved by the proprietor. Operation only on routes that are visible and approved by the proprietor.
– – Negotiating inclines up to a maximum of 15 %. Negotiating inclines up to a maximum of 15 %.
– – Do not negotiate inclines crosswise or at an angle. Transporting loads downhill. Do not negotiate inclines crosswise or at an angle. Transporting loads downhill.
– – Operation in partially public traffic. Operation in partially public traffic.
Z Z
Special equipment and authorisation are required if the truck is to be used in Special equipment and authorisation are required if the truck is to be used in
extreme conditions.
extreme conditions.
The truck is not authorised for use in areas at risk of explosion.
The truck is not authorised for use in areas at risk of explosion.
https://www.besttruckmanuals.com/