Jungheinrich EMC 110/B 10, Руководство по эксплуатации

Страница: 44 / 73

G 1
060
0.GB
G Attachments
1 Crane hook
1.1 Proper use
Using approved fastening gear, the electric control shaft fork lift truck EMB with crane
hook can be used for lifting and transporting loads. Pulling or pushing of loads atta-
ched to the crane hook is not permitted.
f
Before commissioning the truck, make sure that the bolt that fixes the crane arm is
properly secured!
Loads may only be lifted and transported if they do not exceed the permitted load
centres and the pertaining load capacities (Qmax) (see load diagram “Load
capacity / load centre / crane hook”).
The truck may only be moved with a load attached to the hook when the load is se-
cured and has been lowered as far as possible.
A
Eyes for securing the load are provided on the vertical part of the crane arm.
m
The general stipulations regarding the proper use of the truck contained in chapter A
of the present operating instructions continue to remain valid.
G 1
060
0.GB
G Attachments
1 Crane hook
1.1 Proper use
Using approved fastening gear, the electric control shaft fork lift truck EMB with crane
hook can be used for lifting and transporting loads. Pulling or pushing of loads atta-
ched to the crane hook is not permitted.
f
Before commissioning the truck, make sure that the bolt that fixes the crane arm is
properly secured!
Loads may only be lifted and transported if they do not exceed the permitted load
centres and the pertaining load capacities (Qmax) (see load diagram “Load
capacity / load centre / crane hook”).
The truck may only be moved with a load attached to the hook when the load is se-
cured and has been lowered as far as possible.
A
Eyes for securing the load are provided on the vertical part of the crane arm.
m
The general stipulations regarding the proper use of the truck contained in chapter A
of the present operating instructions continue to remain valid.