Jungheinrich EKS 310, Руководство по эксплуатации, Страница: 12 / 97

B 1
0708
.GB
B Truck Description
1 Application
The EKS 310 is an electric powered stockpicker. It is designed to be used on level
surfaces in accordance with DIN 15185 to transport and pick goods. Open or cross
board pallets can be lifted outside the contour of the load wheels or trolley.
Loads can be stacked and unstacked and transported over long distances.
The driver's cab is raised together with the load lifting device to provide excellent
visibility and easy access to the rack levels.
The racks must be suitable for the EKS 310. The safety distances stipulated by the
manufacturer (e. g. EN 1726-2 item 7.3.2) must be observed. The ground surface
must comply with DIN 15185. Guide rails must be installed in the narrow aisles for the
rail guidance system.
Vulkollan guide rollers attached to the truck chassis guide the truck between the
guide rails.
A guidance wire must be routed in the ground for the wire guidance system. The
signals from the wire are received on the chassis and processed in the on-board
computer.
The capacity is shown on the data plate.
Travel direction definition
The following determinations have been made for travel direction specification.
Type Capacity Load centre of gravity
EKS 310k 1000 kg 400 mm
EKS 310 1000 kg 600 mm
Left
Right
Drive
direction
Load
direction
B 1
0708
.GB
B Truck Description
1 Application
The EKS 310 is an electric powered stockpicker. It is designed to be used on level
surfaces in accordance with DIN 15185 to transport and pick goods. Open or cross
board pallets can be lifted outside the contour of the load wheels or trolley.
Loads can be stacked and unstacked and transported over long distances.
The driver's cab is raised together with the load lifting device to provide excellent
visibility and easy access to the rack levels.
The racks must be suitable for the EKS 310. The safety distances stipulated by the
manufacturer (e. g. EN 1726-2 item 7.3.2) must be observed. The ground surface
must comply with DIN 15185. Guide rails must be installed in the narrow aisles for the
rail guidance system.
Vulkollan guide rollers attached to the truck chassis guide the truck between the
guide rails.
A guidance wire must be routed in the ground for the wire guidance system. The
signals from the wire are received on the chassis and processed in the on-board
computer.
The capacity is shown on the data plate.
Travel direction definition
The following determinations have been made for travel direction specification.
Type Capacity Load centre of gravity
EKS 310k 1000 kg 400 mm
EKS 310 1000 kg 600 mm
Left
Right
Drive
direction
Load
direction