1205
.GB
D 2
2
Battery types
The truck is equipped with the following battery types:
The battery weight is indicated on the battery data plate.
F
When replacing/installing the battery make sure the battery is securely located in the
battery compartment of the truck.
3
Charging the Battery
When the green LED (100%) on the battery discharge indicator is lit, the battery is
fully charged.
F
When the red LED on the battery discharge indicator is lit, the battery is discharged.
The truck must be charged with a stationary charger.
– Park the truck securely (see Chapter E).
M
Only connect and disconnect the battery and the charger when the charger is
switched off.
– Connect the charger to the battery. Then connect the charger to a suitable mains
socket (230 V ±10%).
– Charge the battery until the green LED (100%) on the battery discharge indicator
is lit.
– Pull the mains connector of the charger out of the mains socket, and remove the
charger connector from the battery connector.
Z
Do not undertake a lift operation during charging.
M
To ensure a long battery life, it is advisable to run a regular compensation charge (1 x
a week). The charger must be connected to the mains for at least 12 hours.
Mains connection
Mains supply:
230 V (± 10%)
Mains frequency:50 Hz ± 4%
Charging times
The charging time can take up to 12 hours depending on the battery discharge status.
12 volt battery
60AhC5
1205
.GB
D 2
2
Battery types
The truck is equipped with the following battery types:
The battery weight is indicated on the battery data plate.
F
When replacing/installing the battery make sure the battery is securely located in the
battery compartment of the truck.
3
Charging the Battery
When the green LED (100%) on the battery discharge indicator is lit, the battery is
fully charged.
F
When the red LED on the battery discharge indicator is lit, the battery is discharged.
The truck must be charged with a stationary charger.
– Park the truck securely (see Chapter E).
M
Only connect and disconnect the battery and the charger when the charger is
switched off.
– Connect the charger to the battery. Then connect the charger to a suitable mains
socket (230 V ±10%).
– Charge the battery until the green LED (100%) on the battery discharge indicator
is lit.
– Pull the mains connector of the charger out of the mains socket, and remove the
charger connector from the battery connector.
Z
Do not undertake a lift operation during charging.
M
To ensure a long battery life, it is advisable to run a regular compensation charge (1 x
a week). The charger must be connected to the mains for at least 12 hours.
Mains connection
Mains supply:
230 V (± 10%)
Mains frequency:50 Hz ± 4%
Charging times
The charging time can take up to 12 hours depending on the battery discharge status.
12 volt battery
60AhC5
Содержание AMX 10 Inox Pro Ex
