Jungheinrich AMW 22, Руководство по эксплуатации

Страница: 69 / 112

Z
The net value of the weighed weight is displayed. On unloading, the a negative value
is shown for the net weight.
Press the T key (50) to read off the gross weight. The NET segment (48) is
deactivated. Press the T key (50) again to perform a new net weighing.
A tare weight can be entered manually, in either the loaded or unloaded condition.
The tare weight is input at high resolution, irrespective of weight range and value. A
tare weight that is greater than the capacity of the weighing system will not be
accepted.
Checking the current tare weight:
Procedure
• Keep the PT key (50) pressed for three seconds. The most recently used tare
value will appear. The segment on the right side will flash.
• Press Confirm (49) to continue to use the displayed value.
To input a new tare weight:
Procedure
• Keep the PT key (50) pressed for three seconds.
• Press the Increase value key (51) or Decrease value key (50) to change the tare
weight. Press the Skip (52) to skip to the next field. Repeat this operation until the
desired value is displayed.
Activate or save the tare weight:
Procedure
• Press the Confirm key (49) to confirm the value.
The tare weight is now activated (NET segment (48) active). If at this time the
system is laden, the net value for the weighed weight will appear in the display. If
at this time the system is unloaded, the display will show the entered tare weight
as a negative value.
Z
The value that is input will remain active until a new tare weight is entered.
Press the T key (50) to read off the gross weight.
Checking the identity code number:
Z
The weighing system offers the facility to assign identity code numbers to weighings,
to identify them for subsequent processing. These identity code numbers may be up
to five digits long.
Procedure
• Keep the No key (49) pressed for three seconds.
The identity code number most recently input will be displayed. The last position
on the right of the display will flash.
• Press Confirm (49) to continue to use the displayed value.
Z
The identity code number will be accepted. The weighing system reverts to weighing
mode.
69
11.19 en-GB