67
66
Setting the time:
a) Pull the crown into position C.
b) The second hand moves to the hour currently
represented by the hour hand and stops there
(see diagram visualisation: minute 0 = midnight.;
minute 1 = 1 a.m.; Minute 18 = 6 p.m.; etc. up to
minute 23 = 11 p.m.).
c) If the watch is already in quartz mode, continue
with step e).
d) Press the corrector button for longer than 3 sec-
onds.
e) By turning the crown, you now set the desired time via the minute
hand. Each turn of the crown triggers one step of the minute hand.
A clockwise movement triggers a step in the clockwise direction
and a counter-clockwise movement a step in the counter-clockwise
direction.
Please note that the hand movement occurs only in single steps.
Using the
hand moving fast mode
it is possible to set the time
more quickly. To do this, briefly press the corrector button. The
hands now start to move in the direction that they last moved, i.e.
clockwise or counter-clockwise. In order to stop the fast moving,
press the corrector button again.
f) To complete the setting, press the crown back into position A. The
second hand positions itself to the 12 o’clock position and starts
moving.
Note: To have the time shown accurate to the second, we recommend
that you set it to the next full minute and using a reference clock the
crown into position A on the 60th second.
In quartz mode the watch does not perform any automatic attempts
to pick up a time signal.
You can check whether the watch is in quartz mode by briefly pressing
the corrector button. If it is in quartz mode, the second hand jumps in
5-second intervals for one minute. To activate time signal reception a
manual synchronisation is required (see section 8).
10. Resetting/re-starting after a change of battery (Reset)
After a change of battery a reset is automatically performed. After you
insert the battery, all hands move to the 12 o’clock position, ‚1’ is shown
as the date and your watch starts the signal reception process. After
a signal is successfully picked up, the watch automatically sets itself
to the correct time.
If your watch is unable to pick up the time signal for 30 minutes, the
reception process is terminated to save battery power. This is indicat-
ed by the second hand jumping 5 seconds. In order to start another
attempt to pick up a time signal, perform a manual synchronisation
(section 8).
If you are outside the range of any of the transmitters, you can set
the watch manually to the current time. The procedure is described in
section 9 - ‚Quartz mode’. Or you can set the time using the Junghans
MEGA App (section 7.1).
