63
62
9. Quartz mode
If you are staying a long time outside of the range of any of the five
time signal transmitters, we recommend that you set your watch
using the Junghans MEGA App or via quartz mode. In this way you
avoid the watch attempting to pick up a signal and thus save battery
power.
The quartz mode makes it possible to set all time information man-
ually. In crown position B it is the date that is set (leap year/year,
month, date), while in crown position C it is the time (hour, minute,
second).
To set the time manually, proceed as follows:
Leap year
Leap year + 1
Leap year + 3
Leap year + 2
B
Start by
setting the year.
a) Pull the crown into position B.
If the watch is already in quartz mode, continue with step d)
b) The second hand indicates the current hour on the minute scale
(minute 1 – 23).
c) Press the corrector button for longer than 3 seconds. The second
hand initially moves briefly backwards, then it moves forwards and
stops at the leap year setting. A leap year is shown in quarter seg-
ment 9 – 12 (see diagram). For example: 2018 is shown in segment
3 – 6; 2016 was a leap year, so 2018 equates to leap year + 2.
d) As you turn the crown clockwise or counter-clockwise, the hand
moves correspondingly forwards or backwards into the next seg-
ment.
