Junghans MAX BILL MEGA, Руководство пользователя

Страница: 14 / 19

61 60
City Time zone
crown position B
Time zone
crown position C
Apia + 13
Chatham - SZ + 13.45
Kiritimati + 14
Baker Island – 12
Midway Islands – 11 – 11
Hawaii – 10 – 10
Marquesas Islands – 09.30
Anchorage US Alaska – 09 – 09
US Pacific – 07 – 07
Denver US Mountain – 08 – 08
Chicago US Central – 06 – 06
New York US Eastern – 04 – 04
US Atlantic – 05 – 05
St. John's – 03.30
Rio Brasilien – 03 – 03
South Georgia – 02 – 02
Azores – 01 – 01
Please note that the table is based on UTC (Coordinated Universal
Time). During summer time the time changes by one hour.
After 30 days without any successful synchronisation, the receiver is
deactivated in order to save battery power. When travelling back to
time zones with time signal reception a manual synchronisation is
required for picking up the signal.
8. Manual time synchronisation
You can perform a manual time synchronisation at any time – as long
as you are within transmission range of one of the five time signal
transmitters. To do this, press the corrector button with crown in
position A for longer than 3 seconds. The second hand moves to the
8 o’clock position. Hour and minute hand stay in the actual position.
The reception phase begins as soon as the second hand has reached
the 8 o’clock position.
Recommendation: To ensure the best possible conditions for recep-
tion of the time signal, the watch should not be worn and, if possible,
not left near to any electrical appliances, mobiles, cordless phones or
lights that use transformers.
As soon as the time signal has been picked up, the hands automatical-
ly move to the time signal transmitter’s local time.
If synchronisation is not possible with the most recently synchronised
time signal transmitter, the Junghans Autoscan function checks all
other transmitters for possible reception of the time signal.
If no time synchronisation is possible with any of the five transmitters,
the attempt to pick up a signal is terminated after 15 minutes. Until
the next synchronisation, the watch’s movement runs on the basis of
a quartz watch.
You can terminate the manual time synchronisation, as soon as the
second hand has reached the 8 o’clock position. To do so, press the cor-
rector button. Minute and hour hands move back to the original time.