-
The transmitter can cooperate with ZigBee Light Link devices or systems of other
manufacturers, e.g. Philips Hue or Osram Lightify.
-
Surface-mounted installation in interior areas
i
Hereinafter, the participants will be called luminaires.
Product characteristics
-
Supports the adjustment of: brightness, colour temperature, light colour and colour
saturation
-
Corresponds with the ZigBee Light Link specification
-
Saving and recalling of up to 6 scenes
-
Status indication with LED
-
Battery-powered device
-
Software update using separate additional device via radio possible
Insert battery
WARNING!
Risk of chemical burns.
Batteries can burst and leak.
Replace batteries only with an identical or equivalent type.
o
Carefully remove cover (4) from wall transmitter .
i
Keep contacts of batteries and device free of grease.
o
Observe polarity: The positive pole of the battery must be at the top.
o
Apply battery to the positive contact of the battery holder and lock in place with little
pressure.
o
Snap on the cover (4).
2 Basic functions
2.1 Switching or dimming luminaires
i
All luminaires connected to the transmitter will be collectively switched or dimmed.
Figure 2
o
Switch: Short press on
Ɔ
or
ƍ
button.
o
Dim: Long press on
Ɔ
the or
ƍ
button. The dimming process ends when the button
is released.
2.2 Recalling scenes
Scenes help you to save individual settings of one or more persons and to recall them with a
single press of a button.
2/17
32596203
J0082596203
23.05.2016
ZigBee radio transmitter module 4-gang
