Jung Instabus 2134.16 REG, Руководство по эксплуатации, Страница: 13 / 57

Connection
GB
4-channel switching actuator (fig. A), 4-channel C-load switching
actuator (fig. B).
Connection to the bus is by means of the bus connector .
The switching statuses of the relays are indicated by the switch
position indicators
. They are used at the same time for manual
operation of the relays independent of the EIB.
Important: Observe that switch status indicators in the C-load actuator
(shown on the right) are inverted for constructional reasons.
The actuators are connected as shown in the schematic.
The actuator outputs can be connected to different phase conductors.
A B
Connection
GB