Finely stranded with conductor sleeve
0.5 ... 2.5 mm²
Fitting width
36 mm / 2 modules
Bus line
Rated voltage
DC 12 V SELV
Current consumption
max. 20 mA
Connection, Bus
Connection terminal
Cable length
max. 3 m
6.2 Parameter list
Settings window
Device settings
Parameters
Setting options, Basic
setting
Explanations
Manual commissioning
On, Off
Basic setting: On
Blocks manual commissioning
for all device channels. In the
"Off" setting, the device
cannot be reset to the factory
setting.
Settings, channel
Parameters
Setting options, Basic
setting
Explanations
Manual commissioning
On, Off
Basic setting: On
Blocks manual commissioning
for the device channel. In the
"Off" setting, the device
cannot be reset to the factory
setting.
Operating mode
Roller shutter
Venetian blind
Awning
Basic setting: Roller shutter
Roller shutter
A rolling shutter or an awning
is controlled for which the
Fabric stretching function is
required.
Venetian blind
A Venetian blind is controlled.
Awning
An awning is controlled for
which the Fabric stretching
function is required.
Local Operation
On, Off
Basic setting: On
Blocks the output for operation
using the
Prog
button.
Transmission of blind/shutter
position > 10%
On, Off
Basic setting: Off
The current position of the
blind/shutter is always
transmitted when the
blind/shutter comes to a stop.
This parameter makes it
possible to specify that, during
travel, the position is saved
when the blind/shutter position
changes by more than 10%.
The saved value can then be
polled from the eNet server.
7/10
82581813
J:0082581813
12.03.2014
eNet
Radio blinds actuator for rail mounting
