manualshive.com logo in svg

Jung FM 1701 Series, Руководство по эксплуатации

Поделиться
Скачать
Jung FM 1701 Series Скачать руководство пользователя страница 9

LB management 

eNet radio centre plate

Parameters

Setting options 
Basic setting

Explanations

The output switches to continuously "On". All op-
erations of radio transmitters or directly on the at-
tachment are ignored.

Continuous off 
The output switches to continuously "Off". All op-
erations of radio transmitters or directly on the at-
tachment are ignored.

Function "Exten-
sion operation"

Light (dimming), light
(switching), switching,
unused
Basic setting: Light
(dimming)

The attachment is located on a 3-wire extension.
The function of the main device can be entered
here.

Light (dimming)
The channel is integrated for the "Lighting" cent-
ral function in the eNet SMART HOME app.

Light (switching)
The channel is integrated for the "Lighting" cent-
ral function in the eNet SMART HOME app.

Switching 
The channel is not integrated in any central func-
tion.

Unused
The channel is not displayed in the eNet SMART
HOME app and is disabled for use in the com-
missioning interface.

"Venetian blind"
operating mode

Roller shutter 
Venetian blind 
Awning 
Basic setting: Roller
shutter

Roller shutter 
A shutter is controlled.
The channel is integrated for the "Venetian blind"
central function in the eNet SMART HOME app.

Venetian blind 
A Venetian blind is controlled.
The channel is integrated for the "Venetian blind"
central function in the eNet SMART HOME app.

Awning 
An awning is controlled.
The channel is not integrated into the "Venetian
blind" central function in the eNet SMART HOME
app.

Operating mode
"2-channel switch
insert"

Switching operation 
Push-button operation
Flashing
Continuous on 
Continuous off 
Basic setting: 
Switching operation

Switching operation 
After switch-on, the device remains stable in the
"On" state, and stable in the "Off" state after
switch-off.

Push-button operation
The device switches "On" when the channel but-
ton of a radio transmitter is pressed, if the attach-
ment is pressed directly or via an extension and
"Off" when the button is released. It is irrelevant
whether the "On" or "Off" button is pressed.

9 / 29

32597903

07.08.2019

J0082597903

Содержание FM 1701 Series






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды