6.3 Troubleshooting
After a button has been pressed, the status LED flashes red slowly for 3 seconds.
Cause: Battery in the hand-held transmitter is almost empty.
Changing the battery (see chapter Commissioning - Inserting the battery).
Receiver does not react, status LED displays a transmission error. Status LED flashes
red quickly for 3 seconds.
Cause 1: Radio range exceeded. Structural obstacles reduce the range.
Using a radio repeater.
Cause 2: Actuator is not ready for operation.
Check the actuator and mains voltage.
Cause 3: There are radio faults, e.g. through outside radio.
Eliminate radio interference.
i
The actuator causing the transmission error can be removed from the display of
transmission errors. To do this, briefly press the
Prog
button of the hand-held transmitter
during signalling. The actuator is automatically taken into account again when it transmits a
status message after radio transmission.
6.4 Warranty
We reserve the right to make technical and formal changes to the product in the interest of
technical progress.
We provide a warranty as provided for by law.
Please send the device with a description of the defect to our central customer service office.
ALBRECHT JUNG GMBH & CO. KG
Volmestraße 1
58579 Schalksmühle
Telefon: +49.23 55.8 06-0
Telefax: +49.23 55.8 06-2 04
[email protected]
www.jung.de
Service Center
Kupferstr. 17-19
44532 Lünen
Germany
6/6
82582503
J:0082582503
13.03.2014
eNet
Remote control, 1-channel Toggle
