o
Stopping the Venetian blind: Press the button for less than 1 second.
o
Adjusting the Venetian blind: Press the button for less than 1 second.
i
If the break between the two button actuations is longer than approx. 1 second, the
direction will change.
Operating push-button actuator
o
Buttons: The load is switched on for the duration of the button-press.
i
The maximum actuation length is 60 seconds.
5 Information for electrically skilled persons
5.1 Commissioning
DANGER!
Electrical shock when live parts are touched.
Electrical shocks can be fatal.
During commissioning, cover the parts carrying voltage on radio transmitters
and actuators and in their surrounding area.
Insert battery
WARNING!
Risk of chemical burns.
Batteries can burst and leak.
Replace batteries only with an identical or equivalent type.
o
Open battery compartment on the rear side of the hand-held transmitter.
i
Keep contacts of batteries and device free of grease.
o
Apply battery to the positive contact of the battery holder. Observe polarity: the positive
pole of the battery must be at the top.
o
Press gently on battery to snap it in.
o
Close battery compartment.
Hand-held transmitter is ready for operation.
Connecting to radio actuator
Figure 2:
Prog
Button in the battery compartment
i
Up to 10 radio actuators can be connected to a transmitter in a single step.
3/6
82582503
J:0082582503
13.03.2014
eNet
Remote control, 1-channel Toggle
