background image

eNet radio transmitter modules

Receiver does not react, status LED displays a transmission error. Status LED flashes quickly
for approx. 3 seconds.

Cause 1: Radio range exceeded. Structural obstacles reduce the range.

Using a radio repeater.

Cause 2: Actuator is not ready for operation.

Check the actuator and mains voltage.

Cause 3: There are radio faults, e.g. through outside radio.

Eliminate radio interference.

The actuator causing the transmission error can be removed from the display of transmis-
sion errors. To do this, briefly press the top left and bottom right buttons of the wall trans-
mitter simultaneously during the signalling. The LED lights up red. During this time, do not
press any button on the wall transmitter. The actuator is automatically taken into account
again when it transmits a status message after radio transmission.

After a button has been pressed, the status LED flashes red quickly for 3 seconds.

Cause: Maximum permitted transmission period (statutory Duty Cycle Limit) has almost been
reached. For the function of the transmitter to continue, the polling and display of the sum status
will be switched off. As soon as sufficient transmission time is available again, the sum status
will again be polled on button actuation.

Actuate the transmitter again after a short waiting time, normally a few seconds.
Reduce the number of actuations.
Reduce the number of actuators connected to the transmitter.

11 Accessories

Cover kit 1-gang

Art. no. ..401 TSA..

Cover kit 2-gang

Art. no. ..402 TSA..

Cover kit 3-gang

Art. no. ..403 TSA..

Cover kit 4-gang

Art. no. ..404 TSA..

12 Conformity

Hereby Albrecht Jung GmbH & Co. KG declares that the radio system type
Art.-no. FM 4001 M / FM 4002 M / FM 4003 M / FM 4004 M
corresponds to the directive 2014/53/EU. You can find the full article number on the device. The
complete text of the EU Declaration of Conformity is available under the Internet address:
www.jung.de/ce

13 Warranty

The warranty is provided in accordance with statutory requirements via the specialist trade.

ALBRECHT JUNG GMBH & CO. KG
Volmestraße 1
58579 Schalksmühle
GERMANY

Telefon: +49 2355 806-0
Telefax: +49 2355 806-204
[email protected]
www.jung.de

9 / 9

32579243

21.06.2019

J082579243

Содержание eNet FM 4001 M










Отзывы: