eNet radio transmitter modules
3
Device components
Figure 1: 4-gang radio wall transmitter module
(1)
Base plate
(2)
Fastening screws for the base plate
(3)
Design frame
(4)
Wall transmitter module with adapter frame (see adapter frame assembly instructions)
(5)
Fastening screws for the wall transmitter module
(6)
Covers
4
Function
Intended use
–
Radio sensor for transmission of switching, dimming, blind movement and scene com-
mands
–
Operation with radio actuators from the eNet system
Product characteristics
–
Display of the actuator status for status poll by a green LED per channel
–
Display of the transmission status by a red LED
–
Switch-on brightness of dimmer actuators can be saved.
–
Battery-powered device
–
Signalling of transmission errors can be switched off
Can be set with eNet server:
–
Scene All On
–
Operation locks
Supplementary function with eNet server
–
Fully encrypted radio transmission (AES-CCM) from eNet Server software version 2.0
–
Update of the device software
5
Operation
When operating with the eNet Server, operation and signalling could vary from what is de-
scribed here.
Function of status LED in operation
As soon as a button is pressed or released, the status LED first signals radio transmission
–
LED turns red for 2 seconds
2 / 9
32579243
21.06.2019
J082579243
