KNX RF radio transmitter module
4
Function
System information
This device is a product of the KNX system and complies with the KNX directives. Detailed tech-
nical knowledge obtained in KNX training courses is a prerequisite to proper understanding.
The range of a radio system depends on various external circumstances. The range can be op-
timised by the choice of installation location. The product documentation for this device contains
application basics for the KNX radio system.
Planning, installation and commissioning are carried out with the aid of KNX-certified software
of version ETS5 or higher. You can find the up-to-date product database, technical descriptions
and Declaration of Conformity on our Internet site.
Intended use
–
Radio operation of loads, e.g. light on/off, dimming, Venetian blinds up/down, brightness
values, calling up and saving light scenes.
–
Operation in cabled KNX systems via media coupler (see chapter Accessories)
Product characteristics
–
Push-button sensor functions switching, dimming, Venetian blind control, value transmit-
ter, scene recall
–
One, two, three or four button pairs for push-button sensor function or rocker function
–
Status indicator via status LED
–
Integrated temperature sensor
–
Battery-powered device
Energy saving mode
The device switches to the energy saving mode after a preset time. In energy saving mode, the
LEDs remains switched off. During operation, the energy saving mode is exited.
Operations during energy saving mode are executed immediately.
Cyclical transmission of temperature values reduces the lifespan of the battery.
5
Operation
Operating a function or load
￭
Switch: Short press on button.
￭
Dim: Long press on the button.
￭
Move Venetian blind: Long press on button.
￭
Stop or adjust Venetian blind: Short press on button.
￭
Call up light scene: Short press on button.
￭
Save light scene: Press button for longer than 5 seconds.
￭
Set value: Press button briefly.
LED function
Acknowledgement/transmission LED (10) lights up after pressing a button and goes out as soon
as the feedback has been received from the actuator. After the acknowledgement/transmission
LED (10) goes out, the status LED (9) displays the actuator feedback. The display duration can
be changed by the programming or can be dispensed with entirely.
The acknowledgement/transmission LED (10) flashes rapidly if a transmission error occurs.
3 / 6
32595413
29.07.2019
j0082595413
