Standard / Universal automatic switch 1.1 m
Locking the slide switch
Figure 18
The slide switch can be mechanically locked to the AUTO position as required. Use the
provided locking screw for this.
￭
Remove the cover from the slide switch (5) (Figure 15).
￭
Move slide switch to AUTO position.
￭
Screw the locking screw (10) in the hole (9) of the slide switch (Figure 18).
￭
Carefully reattach the cover.
8
Disposal of batteries
Remove empty batteries immediately and dispose of in an environmentally friendly
manner. Do not throw batteries into household waste. Consult your local authorities
about environmentally friendly disposal. According to statutory provisions, the end
consumer is obligated to return used batteries.
9
Technical data
Commissioning mode
S-mode
Current consumption KNX
3 ... 10 mA
Ambient temperature
-5 ... +45 °C
Storage/transport temperature
-25 ... +70 °C
Relative humidity
10 ... 100 % (no moisture condensation)
Protection class
III
Installation height
1.10 m
Detection angle
180 °
Brightness sensor
Measuring range
approx. 1 ... 1000 lx
Temperature sensor
Measuring range
-5 ... +45 °C
Accuracy
± 1 K
Only for "Universal" version:
12 / 13
32597033
24.07.2019
j0082597033
