The right-hand decimal point lights up additionally in the display (figure 5).
o
Use the
n
/
o
buttons (12) to select the desired new radio channel.
The display (13) shows the radio channel.
o
Trigger a teach telegram on the desired radio transmitter (see instructions for radio
transmitter). Operate manually-operated transmitters until the still-current radio channel
flashes in the display.
o
Press
Enter
button (9) for approx. 3 seconds.
The new channel number flashes briefly in the display.
The radio transmitter has been transferred.
i
Cancel operation: Press both buttons
n
and
o
(12) until the right-hand decimal point goes
out in the display.
Deleting individual radio transmitters of a radio channel
Connection compartment is opened.
o
Connect 9 V block battery to connection clip (8).
The channel display (13) lights up (figure 4).
o
Press both buttons
n
and
o
(12) for approx. 10 seconds.
The two decimal points light up additionally in the display (figure 8). Deletion mode is
active.
Figure 8: Deletion mode
o
Trigger a teach telegram on the radio transmitter to be deleted (see instructions for radio
transmitter). Operate manually-operated transmitters until the desired radio channel
appears in the display (13).
The display (13) shows the radio channel that will be deleted.
o
Press
Enter
button (9) for approx. 3 seconds.
The display (13) shows „- -“ (figure 9). The radio transmitter is deleted from the memory for
this radio channel.
The transmitter has been deleted as soon as the number of the radio channel appears
again in the display (13).
i
Cancel operation: Press one of the
n
or
o
buttons (12).
7/10
32532823
J0082532823
28.10.2016
Radio Management
Radio-KNX converter
