Figure 5: Assignment mode
o
Use the
n
/
o
buttons (12) to select the desired radio channel in accordance with the
planned and programmed configuration.
The display (13) shows the desired radio channel.
o
Trigger a teach telegram on the desired radio transmitter (see instructions for radio
transmitter). Operate manually-operated transmitters until
LE
appears in the display
(figure 6).
Figure 6: Indication
LE
– „Learn“
o
Press the
Enter
(9) button briefly.
The channel number flashes briefly in the display.
The radio transmitter has been saved.
i
A channel can be operated from several radio transmitters.
i
Cancel operation: Press both buttons
n
and
o
(12) until the right-hand decimal point goes
out in the display.
i
If all 100 memory slots are occupies, the display shows
OF
(figure 7).
Figure 7: Indication
OF
– „Overflow“
Transferring radio transmitters
Connection compartment is opened.
o
Connect 9 V block battery to connection clip (8).
The channel display (13) lights up (figure 4).
o
Press both buttons
n
and
o
(12) for approx. 5 seconds.
6/10
32532823
J0082532823
28.10.2016
Radio Management
Radio-KNX converter
