Mounting and connecting the RMD device
Figure 1
(1) KNX connection
(2) USB connection
(3) Slide
i
The slide fixes the USB cable in place and ensures that the required installation height in
the distributor is maintained.
o
Mount device on DIN rail with the terminals facing downwards.facing downwards.
o
Connect bus line with device connection terminal (1).
Optionally connect the USB line permanently:
o
Unlock the slide (3) by pulling the end of the bow forwards. Pull out slide.
o
Insert the USB cable into the socket (2).
o
Re-insert slide (3) until it engages noticeably.
2/4
82400203
j0082400203
09.05.2018
USB data interface
