Mounting and connecting UP device
Figure 2
(1) KNX connection
(2) USB connection
(4) Appliance box
(5) Frame (accessories)
(6) TAE cover (accessories)
Mounting in flush-mounted or surface appliance box
o
Connect bus line with device connection terminal (2).
o
Mount the device in the appliance box (4).
o
Fit the frame (5) onto the appliance box.
o
Mount the TAE cover (6).
Programming the physical address
The USB data interfaces are exclusively programmed locally with the physical address via a
connected PC and therefore do not have a programming button or programming LED. The
physical address must match the KNX line to which it is connected.
o
Connect PC with the device.
o
Program the physical address.
o
Write the physical address on the device label.
4 Technical data
KNX
Rated voltage KNX
DC 21 ... 32 V SELV
KNX medium
TP 256
Protection class
II
3/4
82400203
j0082400203
09.05.2018
USB data interface
