Jumpking Ultra JumpPOD, Руководство пользователя

Страница: 19 / 22

10. Spread out Top FRP Pole (12) joint each section Connector
to a straight line.
Assemble the remaining Top FRP Pole (12) in the same way .
Spread the Netting (16) on the trampoline bed,
insert a Top FRP Pole (12) into the opening of
Top Sleeve on the Netting (16). Insert the
other Top FRP Pole (12) into the opposite opening
of Top Sleeve on the Netting (16).
11. Joint each end of Top and bottom FRP Pole by the clip of
connector at each opening. The Top Sleeve of the
Netting (16) become a round shape.
See inset drawing for attach of Handing Point :
19
10
10.a
11
11.a
Spread out FRP Pole and Joint each section
to one straight line.
Top FRP Pole (11)
Netting(16)
Opening
Joint the end of each pole by Clip of Connector
Start:
Finish
:
Door of Netting
Top Sleeve
Attached Hanging Point:
Plastic cap(18)
Hanging point 1
Hanging point 8
Hanging point 7
Hanging point 6
Hanging point 5
Hanging point 4
Hanging point 3
Hanging point 2
Door of Netting
Netting (16)
(11)
FRP Pole(12)
(18)