Jumpking Ultra JumpPOD, Руководство пользователя

Страница: 17 / 22

18
4. Lay the Frame Pad (6) on the frame. Adjust the
position of the Frame Pad so the notches are
aligned with the Legs (3) as shown. Be sure
8 Enclosure Frame Opening are fit to the
Enclosure Socket position.
Do not use the trampoline without the Frame
Pad (6), which is designed to reduce the likeli-
hood of injury to the user from coming in con-
tact with the trampoline frame. If you do not
have a Frame Pad, contact your dealer to
obtain one. Properly install the Frame Pad
before using the trampoline.
4
Enclosure Frame Opening
Notches
6
3
3
Frame Pad (6)
Enclosure Socket
Enclosure Frame Opening
Thread one end of Elastic Tie-Down, then tie a
knot on V-Ring.
Repeat this step with the remaining straps
each pad section (not shown).
Elastic Tie-Down
Spring
V-Ring
V-Ring
5
A
B
C
Frame Pad
Frame Pad
Frame Pad
Top tube
Top tube
Top tube
Webbing
Webbing
Webbing
D-ring
D-ring
D-ring
Look under the trampoline and locate the pairs
of straps near the edge of bed and Double
D-ring and webbing near the frame.
See the inset drawing. A, B and C. Repeat this
step with the remaining straps (not shown).
5
Strap with Double D-ring on the pad edge